AHB33839405 LG Rack Assembly
Rack Assembly works with some LG models of Dishwashers
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Rack Assembly works with some LG models of Dishwashers
Write Your Own Review
The following parts are replaced by this product
- MGR38994004
DIY Instructions for Replacing the AHB33839405 LG Rack Assembly
Before beginning, it is important to gather all the necessary tools and replacement parts. The necessary tools will depend on the model of your appliance, but typically include a Phillips-head screwdriver and an adjustable wrench. You should also have the new AHB33839405 LG Rack Assembly replacement part.
1. Unplug the appliance or cut off the power completely. You’ll want to make sure the power is completely disconnected before you begin any maintenance, as the appliance can cause harm to those working on it if the power is still connected.
2. Use the screwdriver to remove the screws that secure the rack assembly in place. Begin by carefully removing the screws, taking note of where each one was located for ease of reassembly later.
3. Pull the rack assembly out of the appliance. If there are any wires attached to the assembly, gently disconnect them from the back of the appliance.
4. Slide the new AHB33839405 LG Rack Assembly into place. Line up the holes in the assembly with the holes in the appliance and secure them in place with the screws.
5. Plug the appliance back in or restore power and test the new assembly. Once you’ve restored power, check to make sure the rack assembly functions properly.
By following these DIY instructions, you will be able to successfully replace the AHB33839405 LG Rack Assembly on your own. Make sure to regularly inspect the rack assembly in order to identify and repair any potential problems before they worsen over time.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Before beginning, it is important to gather all the necessary tools and replacement parts. The necessary tools will depend on the model of your appliance, but typically include a Phillips-head screwdriver and an adjustable wrench. You should also have the new AHB33839405 LG Rack Assembly replacement part.
1. Unplug the appliance or cut off the power completely. You’ll want to make sure the power is completely disconnected before you begin any maintenance, as the appliance can cause harm to those working on it if the power is still connected.
2. Use the screwdriver to remove the screws that secure the rack assembly in place. Begin by carefully removing the screws, taking note of where each one was located for ease of reassembly later.
3. Pull the rack assembly out of the appliance. If there are any wires attached to the assembly, gently disconnect them from the back of the appliance.
4. Slide the new AHB33839405 LG Rack Assembly into place. Line up the holes in the assembly with the holes in the appliance and secure them in place with the screws.
5. Plug the appliance back in or restore power and test the new assembly. Once you’ve restored power, check to make sure the rack assembly functions properly.
By following these DIY instructions, you will be able to successfully replace the AHB33839405 LG Rack Assembly on your own. Make sure to regularly inspect the rack assembly in order to identify and repair any potential problems before they worsen over time.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
