AEM74333101 LG Dishwasher Drain Hose Assembly
Drain hose Assembly for some models of LG Dishwashers.
Drain hose Assembly for some models of LG Dishwashers.
Write Your Own Review
Replacing the AEM74333101 LG Dishwasher Drain Hose Assembly
Tools & Supplies Needed:
-Adjustable crescent wrench
-Pliers
-Replacement AEM74333101 LG dishwasher drain hose assembly
Instructions:
1. Locate the factory installed dishwasher drain hose and ensure that it is disconnected from the sink drain connection, or garbage disposal.
2. Use the adjustable crescent wrench to remove the mounting clamp securing the dishwasher drain hose in place.
3. Fully unthread the existing drain hose from the sink drain connection.
4. Disconnect the existing dishwasher drain hose from the dishwasher drain outlet.
5. Use pliers to release the clamps securing the dishwasher drain hose in place to the inlet valve and drain pump.
6. Fully remove the existing dishwasher drain hose from the dishwasher and discard.
7. Using the replacement AEM74333101 LG dishwasher drain hose assembly, securely attach one end of the hose to the dishwasher inlet valve.
8. Attach the other end of the dishwasher drain hose assembly to the dishwasher drain outlet.
9. Securely attach the mounting clamp to the dishwasher drain hose assembly and tighten with the adjustable crescent wrench.
10. Reconnect the dishwasher drain hose assembly to the sink drain connection then ensure it is tight.
11. Turn the water supply back on to the dishwasher and check the connections to ensure no leaks are present.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools & Supplies Needed:
-Adjustable crescent wrench
-Pliers
-Replacement AEM74333101 LG dishwasher drain hose assembly
Instructions:
1. Locate the factory installed dishwasher drain hose and ensure that it is disconnected from the sink drain connection, or garbage disposal.
2. Use the adjustable crescent wrench to remove the mounting clamp securing the dishwasher drain hose in place.
3. Fully unthread the existing drain hose from the sink drain connection.
4. Disconnect the existing dishwasher drain hose from the dishwasher drain outlet.
5. Use pliers to release the clamps securing the dishwasher drain hose in place to the inlet valve and drain pump.
6. Fully remove the existing dishwasher drain hose from the dishwasher and discard.
7. Using the replacement AEM74333101 LG dishwasher drain hose assembly, securely attach one end of the hose to the dishwasher inlet valve.
8. Attach the other end of the dishwasher drain hose assembly to the dishwasher drain outlet.
9. Securely attach the mounting clamp to the dishwasher drain hose assembly and tighten with the adjustable crescent wrench.
10. Reconnect the dishwasher drain hose assembly to the sink drain connection then ensure it is tight.
11. Turn the water supply back on to the dishwasher and check the connections to ensure no leaks are present.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
