5220FR2075L LG Washer Cold Water Inlet Valve Assembly
LG Electronics Sears Kenmore Clothes Washer Washing Machine WATER INLET FILL VALVE 5221ER1003A
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
LG Electronics Sears Kenmore Clothes Washer Washing Machine WATER INLET FILL VALVE 5221ER1003A
Write Your Own Review
The following parts are replaced by this product
- AGM73269503
Replacing the LG 5220FR2075L Washer Cold Water Inlet Valve Assembly
The LG 5220FR2075L Washer Cold Water Inlet valve assembly is an essential part of your washing machine. If it gets damaged, you can replace it yourself with a few simple steps. This DIY guide will explain how to replace the valve assembly for your LG washer.
Tools Needed:
• Phillips-head screwdriver
• Pliers
• Replacement 5220FR2075L LG Washer Cold Water Inlet Valve Assembly
Instructions
1. Shut off the water supply to the washing machine and unplug the power cord.
2. Locate the back panel of your washer and remove it by unscrewing the screws securing it in place.
3. Disconnect the cold water hose from the inlet valve by using pliers to carefully loosen and remove the hose clamp.
4. Unscrew the coupling nut connecting the inlet valve to the water pipe.
5. Remove the two mounting screws securing the valve to the washer's housing.
6. Carefully take out the valve and discard it.
7. Install the new LG 5220FR2075L Washer Cold Water Inlet Valve Assembly first by connecting the coupling nut to the water pipe and tightening it.
8. Secure the valve to the washer's housing with the two mounting screws.
9. Reattach the cold water hose to the inlet valve and secure it with the hose clamp.
10. Replace the back panel of the washer and secure it with the screws.
11. Plug in the power cord and turn on the water supply.
12. Run a cycle to check if the new LG 5220FR2075L Washer Cold Water Inlet Valve Assembly is working properly.
Your LG 5220FR2075L Washer Cold Water Inlet Valve Assembly has been successfully replaced. With these easy steps, you can keep your washing machine running efficiently and safely.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
The LG 5220FR2075L Washer Cold Water Inlet valve assembly is an essential part of your washing machine. If it gets damaged, you can replace it yourself with a few simple steps. This DIY guide will explain how to replace the valve assembly for your LG washer.
Tools Needed:
• Phillips-head screwdriver
• Pliers
• Replacement 5220FR2075L LG Washer Cold Water Inlet Valve Assembly
Instructions
1. Shut off the water supply to the washing machine and unplug the power cord.
2. Locate the back panel of your washer and remove it by unscrewing the screws securing it in place.
3. Disconnect the cold water hose from the inlet valve by using pliers to carefully loosen and remove the hose clamp.
4. Unscrew the coupling nut connecting the inlet valve to the water pipe.
5. Remove the two mounting screws securing the valve to the washer's housing.
6. Carefully take out the valve and discard it.
7. Install the new LG 5220FR2075L Washer Cold Water Inlet Valve Assembly first by connecting the coupling nut to the water pipe and tightening it.
8. Secure the valve to the washer's housing with the two mounting screws.
9. Reattach the cold water hose to the inlet valve and secure it with the hose clamp.
10. Replace the back panel of the washer and secure it with the screws.
11. Plug in the power cord and turn on the water supply.
12. Run a cycle to check if the new LG 5220FR2075L Washer Cold Water Inlet Valve Assembly is working properly.
Your LG 5220FR2075L Washer Cold Water Inlet Valve Assembly has been successfully replaced. With these easy steps, you can keep your washing machine running efficiently and safely.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
