68-1174-32-888 Greenwald Coin Operated Laundry Lock and Key

Replacing the 68-1174-32-888 Greenwald Industries Coin Operated Laundry Lock and Key

Replacing a Greenwald Industries coin operated laundry lock and key is a relatively straightforward process that can be completed with basic tools. Whether you are changing out an old lock for a new one or simply wish to use a new key, this guide will walk you through the necessary steps.

Tools You’ll Need:

-Flathead screwdriver
+Phillips head screwdriver
-Flat blade knife

Instructions:

1. Remove the existing Greenwald Industries coin operated laundry lock. If the existing lock is secured with screws, use a Phillips head screwdriver to remove them.

2. Use a flat blade knife to pry the old lock off. Be careful not to damage the door surrounding the lock.

3. Install the new lock, then secure it with the included screws.

4. Align the keyway of the lock with the new key, then insert the key.

5. Turn the key to open the lock. Verify that it is secured by turning the key again to close the lock.

6. Test the new lock multiple times to ensure it functions properly.

Replacing the 68-1174-32-888 Greenwald Industries Coin Operated Laundry Lock and Key is a straightforward process that can be completed with minimal tools. With the proper preparation, you can complete this task quickly and easily without any hassles.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.