WB01T10018 GE Oven Screw
This GE WB01T10018 SCR 10-16 SCREW is the perfect solution for your appliance. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This GE WB01T10018 SCR 10-16 SCREW is the perfect solution for your appliance. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
The following parts are replaced by this product
- WB1T10018
DIY Guide: How to Replace a GE WB01T10018 SCR 10-16 Plug
Replacing the plug of your GE WB01T10018 SCR 10-16 appliance is an easy do-it-yourself repair that could help save you time and money. Here are the steps you should take to make sure the job is done properly and safely.
Tools Needed
• Flathead Screwdriver
• Phillips Screwdriver
Step 1 - Disconnect Power
Before beginning this repair, ensure that the appliance is disconnected from any power source. Unplugging the cord from the outlet will prevent any electric shock or damage to the appliance.
Step 2 - Remove the Cover
Using a flathead screwdriver, remove the screws from the back panel of your GE WB01T10018 SCR 10-16 appliance. Gently lift off the cover to access the wiring.
Step 3 - Remove the Old Plug
Take note of the wiring pattern before unplugging the old plug. Use a Phillips screwdriver to remove the screws that attach the plug to the appliance. Carefully remove the old plug and discard it.
Step 4 - Attach the New Plug
Carefully line up the new plug with the wiring pattern of the old plug. Secure the new plug with the screws. Once the plug is secure, reinstall the back panel with the screws.
Step 5 - Test the Appliance
Plug the cord back into the power outlet and test the appliance to make sure the repair was successful.
Congratulations - you have successfully replaced the GE WB01T10018 SCR 10-16 plug.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the plug of your GE WB01T10018 SCR 10-16 appliance is an easy do-it-yourself repair that could help save you time and money. Here are the steps you should take to make sure the job is done properly and safely.
Tools Needed
• Flathead Screwdriver
• Phillips Screwdriver
Step 1 - Disconnect Power
Before beginning this repair, ensure that the appliance is disconnected from any power source. Unplugging the cord from the outlet will prevent any electric shock or damage to the appliance.
Step 2 - Remove the Cover
Using a flathead screwdriver, remove the screws from the back panel of your GE WB01T10018 SCR 10-16 appliance. Gently lift off the cover to access the wiring.
Step 3 - Remove the Old Plug
Take note of the wiring pattern before unplugging the old plug. Use a Phillips screwdriver to remove the screws that attach the plug to the appliance. Carefully remove the old plug and discard it.
Step 4 - Attach the New Plug
Carefully line up the new plug with the wiring pattern of the old plug. Secure the new plug with the screws. Once the plug is secure, reinstall the back panel with the screws.
Step 5 - Test the Appliance
Plug the cord back into the power outlet and test the appliance to make sure the repair was successful.
Congratulations - you have successfully replaced the GE WB01T10018 SCR 10-16 plug.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
