How to Replace Dishwasher Roller Wheels: Step-by-Step Guide

Step 1: Obtain the Correct Roller Kit

• Identify your dishwasher’s model number to find the exact replacement kit for your appliance.
• Use a trusted supplier to purchase OEM roller assemblies for a perfect fit.
• Check whether your model uses different front and rear rollers.
• Avoid universal or off-brand rollers to prevent damage.

Step 2: Shut Off Power and Water Supply

• Turn off the circuit breaker supplying power to the dishwasher.
• Shut off the hot water supply under the sink.
• Disconnect the intake hose, using a towel to catch water.

Step 3: Remove the Lower Dish Rack

• Fully extend the lower rack and lift to release the rear rollers.
• Remove and place the rack on a towel or tray.
• Handle gently to avoid bending the rack frame.

Step 4: Detach the Old Rear Rollers

• Examine how the rear roller axles attach with clips.
• Press the clip and twist to remove the roller.
• Remove both rear rollers.

Step 5: Install the New Rollers

• Take the new assemblies from the kit.
• Align the axle with the slotted bracket and click it securely.
• Repeat for the other side.
• Rotate each wheel to confirm smooth movement.

Step 6: Reinstall the Lower Rack

• Align the new rollers with the support channels.
• Lower the rack into place and ensure it rolls smoothly.

Step 7: Restore Water and Power

• Reconnect the intake hose and turn the valve back on.
• Check for leaks.
• Flip the circuit breaker back on.

Step 8: Confirm Proper Operation

• Run an empty test cycle to ensure smooth operation.
• Check for smooth gliding, no noise, and stable movement.