100% Guaranteed Genuine Parts
S97007894 Broan Range Replacement Hood Filter Set of 2
Broan Nutone Range Vent Hood Aluminum Filter 97007894● 2 Pack● Size: 9-7/8 in. X 11-11/16 in. X 3/8 in. W/Pull Tab● Same as WB2X3998● Same as RHF0914We are a Factory Authorized Parts Distributor for Broan Nutone. Trust us for all of your Broan Nutone appliance parts and accessories needs.
Weight : 1.320900 lbs
Dimension : 12.000000 x 10.200000 x 1.500000
Compatible Brands
About this product
Broan Nutone Range Vent Hood Aluminum Filter 97007894● 2 Pack● Size: 9-7/8 in. X 11-11/16 in. X 3/8 in. W/Pull Tab● Same as WB2X3998● Same as RHF0914We are a Factory Authorized Parts Distributor for Broan Nutone. Trust us for all of your Broan Nutone appliance parts and accessories needs.
Weight : 1.320900 lbs
Dimension : 12.000000 x 10.200000 x 1.500000
The following parts are replaced by this product
- 97007894
- 99010152
No more associated models for this part.
How to Replace the Broan S97007894 Range Hood Filter
Replacing the range hood filter in your Broan S97007894 is an important part of regular kitchen maintenance that can help keep your range hood in good condition and help maintain proper air flow. Here’s how to replace it:
1. Locate your filter. Most Broan range hoods come with a charcoal filter, which requires a regular replacement. The filter is generally found on the underside of the hood.
2. Remove the old filter. Open the filter cover and remove the old filter by pulling outwards on the filter frame. Discard the old filter.
3. Install the new filter. Insert the new filter into the filter frame and be sure that it is properly seated so that it will not come loose during operation.
4. Close the filter cover. Check to ensure that the filter cover is fastened securely.
5. Test the range hood. Turn on the range hood and test it for proper air flow. If air flow is obstructed or insufficient, check the filter again to make sure it is properly installed.
You’ve now successfully replaced the filter in your Broan S97007894 range hood. Be sure to repeat this process every few months or as necessary to keep your range hood in good condition.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the range hood filter in your Broan S97007894 is an important part of regular kitchen maintenance that can help keep your range hood in good condition and help maintain proper air flow. Here’s how to replace it:
1. Locate your filter. Most Broan range hoods come with a charcoal filter, which requires a regular replacement. The filter is generally found on the underside of the hood.
2. Remove the old filter. Open the filter cover and remove the old filter by pulling outwards on the filter frame. Discard the old filter.
3. Install the new filter. Insert the new filter into the filter frame and be sure that it is properly seated so that it will not come loose during operation.
4. Close the filter cover. Check to ensure that the filter cover is fastened securely.
5. Test the range hood. Turn on the range hood and test it for proper air flow. If air flow is obstructed or insufficient, check the filter again to make sure it is properly installed.
You’ve now successfully replaced the filter in your Broan S97007894 range hood. Be sure to repeat this process every few months or as necessary to keep your range hood in good condition.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review