Roper Appliance Parts

This Top Load Washer Bearing Replacement Tool Kit is needed to repair install the bearing, shaft, and seal kit. Which is used on Whirlpool® and Kenmore® washing machines. Wh ...en replacing this part, if you see that your motor stator is broken, check your model number to confirm compatibility. Please remember to unplug the washer or shut off the breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Tub Bearing and Drive Shaft Kit• Tools Needed: Specialized Tools Read More Read Less

The Dryer Drum Support Roller Shaft holds the drum roller in place on the bulkhead and provides a smooth surface for the roller to spin on. This part is intended for your righ ...t side drum support. This replacement shaft is 3-3/16" long, but does not require a washer or a nut. Installing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before you begin. Helpful Tip: While the dryer is disassembled, drum roller (item 349241T). This kit contains two drum support rollers. If the drum rollers are worn out, the dryer may not turn properly or may be excessively noisy. Be aware that the drum bearings are self-lubricating; it is not necessary to lubricate them yourself.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Drum Support Roller Shaft• Tools Needed: Phillips-Head screwdriver, snap-ring pliers Read More Read Less

This SxS Refrigerator Door Gasket is on the inner door panel of your freezer and creates a seal around the door to prevent warm air from entering the refrigerator. If this gas ...ket is worn out, cold air will leak out of the freezer. As a result, the freezer may run longer in an attempt to cool down, or frost may accumulate. Replacing it may alleviate these issues. This gasket is black and designed to be used with compatible side-by-side refrigerators. To remove any creases or wrinkles from the new gasket, set it in the sun or hot water for a few minutes. Replacing this part will require no disassembly or repair experience. You must unplug the appliance or shut off the house circuit breaker before installing. Also turn off the refrigerator's water supply before you begin.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Door Gasket• Tools Needed: Multi screwdriver Read More Read Less

The Dryer Lint Filter is a screen that provides proper air flow and operation of your dryer. The filter should be cleaned before every load of laundry and replaced immediately ... if damaged. If the existing part is damaged or missing, replacing this part may alleviate these issues. Quickly replacing your dryer’s lint filter is a quick and essential way to help keep your appliance operating at optimal levels. Replacing this part will require no disassembly or repair experience. Recommended Item: The universal Cleaning Brush (item 4210463RW) is useful to remove lint and other debris from the dryer’s venting.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Lint Filter• No tools required for installation Read More Read Less

The Top Mount Refrigerator Freezer Door Gasket is new rubber door seal for the freezer section of your appliance. The color of this replacement part is Mist Beige. If your ref ...rigerator’s door doesn't close properly or you can feel cold air escaping the appliance, replacing this part may alleviate these issues. Note that a refrigerator's original door seal may compress over time, causing the refrigerator to work harder to maintain a constant, cool temperature. Frost may accumulate inside the appliance as a result of this issue. Replacing this part will require no disassembly or repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Mount Refrigerator Freezer Door Gasket• No tools required for installation Read More Read Less

Control board works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of stoves / ovens / ranges.

This Top Load Washer Self Leveling Leg Spring is part of the self leveling leg mechanism, and attaches to the two leveling link arms to provide tension to the links. The sprin ...g is located at the back bottom of the machine hooked between two brackets. Grab it with a pair of needle-nose pliers to remove each side from the brackets. Replacing this part will require basic tools, some disassembly of the washing machine and novice repair experience. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Self Leveling Leg Spring• Tools Needed: Needle Nose Pliers Read More Read Less

This Top Load Washer Water Level Switch is located inside the appliance and controls the level of water that enters the tub during the washing cycle. If your washer is over- o ...r under-filling the wash tub during use, then there could be an issue with the water level switch. Replacing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: During this repair, check the tube from the side of the tub that attaches to the switch to ensure there aren’t any leaks or clogs that could cause filling issues.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Water Level Switch• Tools Needed: Multi screwdriver Read More Read Less

The Refrigerator Light Socket Kit houses the light bulb in the refrigerator. If your light is no longer working in your refrigerator, replacing this part may alleviate the iss ...ue. To access the socket, remove the light bulb from your refrigerator and pull on the tab of the socket with a small screwdriver to remove it. Make sure when attaching the light shield to the socket, you pay attention to the position of the light bulb in your fridge so the shield will cover it correctly. This kit includes the new socket, a light shield, (2) wire terminals (if needed depending on your model) and instructions. Installing this part will require basic hand tools, minor disassembly of the refrigerator and novice repair experience. Remember to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Light Socket Kit• Tools Needed: Multi screwdriver Read More Read Less

W11533213-includeCORE is an original equipment manufactured (OEM) part. Enhance the efficiency of your refrigerator with this high-quality electronic control board, designed s ...pecifically for Whirlpool and compatible with several leading brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper. This circuit board is essential for managing various fridge functions, ensuring optimal performance and reliability. Its durable construction promises long-lasting service, reducing the need for frequent replacements. Easily installed, this part is perfect for DIY repairs, allowing you to restore your appliance quickly and effectively. Whether you’re troubleshooting issues or performing routine maintenance, this control board is a vital component for maintaining a well-functioning refrigerator. Maintain your appliance with this dependable part today to keep your food fresh and your energy bills low. Read More Read Less