Magic Chef Appliance Parts Valve & Float

The Dishwasher Water Inlet Valve allows the appliance to fill with water and complete the cleaning cycle. If your dishwasher won't fill properly or overflows and leaks water o ...n the floor, then the water valve may be restricted or damaged and will need replacement. Note that if the dishwasher is underfilling, it will most likely exhibit poor wash performance. Installing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. Also be sure to turn off the water supply before you begin. Required Accessory: You will need to reuse the brass fitting from the existing part with the new valve or purchase a new one (item W10685193) if the old one doesn’t fit; use pipe joint compound to securely attach the fitting to the new part. Recommended Item: The Dishwasher Drain Pan (item 1021760) slides underneath the appliance and diverts any water leak to the front of the dishwasher.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Water Inlet Valve• Tools Needed: Multi screwdriver, 5/8" wrench Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Top Load Washer Water Inlet Valve lets the hot and cold water into your washing machine and distributes it around to the dispensers. If the valve is leaking or the soleno ...ids are damaged and water isn't coming in, replacing this part may alleviate these issues. Usually, a long or slow fill cycle is often due to a restricted water valve. To access the part, after shutting off the water supply, remove the hot and cold fill hoses (usually labeled "H" and "C") at the back of the machine from the valve. Be sure to set a towel down to catch any water. You'll then remove the top panel of the washer. Please note: The valve should never be disassembled and cleaned, only replaced. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Water Inlet Valve• Tools Needed: Multi screwdriver, putty knife, pliers, and channel locks Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This SxS Refrigerator Water Inlet Valve Kit supplies water to the refrigerator ice maker and water dispenser. This Water Inlet Valve Kit includes the valve, 1/4" tubing, and a ... plastic union. If one of the solenoids in the valve has failed, water is no longer being supplied to the ice maker or the dispenser and will need to be replaced. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Also, make sure to turn the water source to the refrigerator completely off before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Water Inlet Valve• Tools Needed: Multi screwdriver Read More Read Less

This Top Load Washer Dual Water Inlet Valve allows hot and cold water to fill in the washer during the cleaning cycle. If your washer isn’t receiving the proper amounts of c ...old and/or hot water, one or more of the solenoids in the current valve may have failed. You may also need to replace this part if you find that your washer is filling slowly, not filling at all or leaking cold water onto the floor. Replacing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Recommended Item: Consider replacing the Fill Hose (item 8212487RP) at the same time you complete this repair. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Water Inlet Valve• Tools Needed: Multi screwdriver, standard pliers Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Ice Maker Water Inlet Valve supplies water to the ice maker to fill the water reservoir. If one of the solenoids in the valve has failed, replacing this part may alleviate ... the issue. This valve is a 120v, 16HZ and 15W valve. Replacing this part will require basic hand tools and some disassembly of the ice maker. Previous repair experience will be helpful but is not necessary. You must unplug the ice maker or shut off the house circuit breaker for the appliance before installing this part. Also be sure to turn off the water supply.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Ice Maker Water Inlet Valve• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.