Magic Chef Appliance Parts

Whirlpool W11194438 HOUSING We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!

The Dishwasher Water Inlet Valve allows the appliance to fill with water and complete the cleaning cycle. If your dishwasher won't fill properly or overflows and leaks water o ...n the floor, then the water valve may be restricted or damaged and replacing it may alleviate these issues. Note that if the dishwasher is underfilling, it will most likely exhibit poor wash performance. In order to access the part, you'll remove the lower access panel from the dishwasher. Note that you will need to reuse the brass fitting from the existing part with the new valve; use pipe joint compound to securely attach it to the new part.Replacing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Also be sure to turn off the water supply to your dishwasher before you begin. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner* (item W10282479) to help reduce limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance.*affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Water Inlet Valve• Tools Needed: Multi screwdriver, channel lock pliers Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

W10259232 is an original equipment manufactured (OEM) part. Enhance the functionality and appearance of your microwave with this stainless steel vent grille, designed to fit a ... variety of brands including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, Roper, and Whirlpool. Crafted with durability in mind, this high-quality part not only serves as an essential component of your appliance but also adds a sleek, modern touch to your kitchen decor. The easy-to-install design ensures that you can quickly replace the existing grille, improving air flow and efficiency. This grill and kickplate is an ideal choice for maintaining the performance and aesthetic of your kitchen appliances. Maintain your microwave today and enjoy a seamless blend of functionality and elegance. Read More Read Less

The Refrigerator Ice Dispenser Door Kit opens the chute to allow ice to pass through the dispenser. This kit includes (1) flapper, (1) solenoid, (1) strike arm, (1) solenoid p ...lunger and installation instructions. Note that this kit doesn’t include the spring (item 61004388). Installing this part will require basic hand tools, minor disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Ice Dispenser Door Kit• Tools Needed: Multi screwdriver, putty knife Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

Whirlpool Maytag Magic Chef KitchenAid Roper Norge Sears Kenmore Admiral Amana Washing Machine Clothes Washer MOTOR PULLEY 21001108We are a Factory Authorized Parts Distributo ...r for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs. Read More Read Less

This Electric Dryer Timer controls the electrical components of the appliance and duration of its drying cycles. If any of the contacts in your appliance’s timer have burned ... out, or if the motor inside the unit shorted out and the timer is no longer functioning, replacing this part may alleviate the issue. This timer does not include the control knob, but you can purchase it separately. Specifications: 240V and 60HZ. Installing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Electric Dryer Timer• Tools Needed: Multi screwdriver Read More Read Less

The Stand Mixer Speed Control Plate controls the speed of the stand mixer motor. The speed control plate is part of the speed control system. If the contacts aren't closing an ...d your mixer is running loud, or if the contacts have failed and your mixer is no longer turning on, replacing the control plate may alleviate these issues. To access the part, remove all attachments and the bowl of the mixer. Then remove the back cover of the mixer and the screws from the trim band. Remove the wires from the seal of the mixer in order to take the spring off of the speed control plate. Make sure you hook the spring with a needle nose pliers securely to remove. Disconnect the wires from the phase control board. You'll then be able to remove the upper two screws holding in the old speed control plate. Note: These upper two screws are where you adjust the speed of your mixer. Make sure you measure them from the back of their post to the back of the speed control plate at 3/8-in. Replacing this part will require basic hand tools, some disassembly of the stand mixer and novice repair experience. You must unplug the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Stand Mixer Speed Control Plate Assembly• Tools Needed: Multi screwdriver, needle-nose pliers Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.