Estate

The WP3385734 Whirlpool Dishwasher Control Panel is a certified OEM (Original Equipment Manufacturer) part that works with select models of Whirlpool, Jenn-Air, Kenmore, Kitch ...enAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper dishwashers. This electronic display serves as your dishwasher, reading your button inputs and initiating the proper wash cycles. This usually has a touch or button interface for selecting cycles, options, and start/cancel functionalities. Once a cycle has been selected, the control panel communicates with the dishwasher's internal components to control water flow, heating elements, and wash time. This ensures that your dishes are thoroughly cleaned. Read More Read Less

This Rear Dryer Drum Felt Seal is what seals the hot air into the dryer drum as it rotates. If hot air is leaking out of your dryer, the seal may be worn causing your dryer to ... take longer to dry your clothes. If the seal is sagging, it could pinch and mark your clothes. This seal is compatible with many different models and fits the rear drum. Includes 1 seal and adhesive to install. Replacing this part will require basic hand tools, disassembly of the dryer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Felt Drum Seal• Tools Needed: Multi screwdriver, putty knife, 5/16" nut driver Read More Read Less

This Top Load Washer Timer controls the length of the different parts of the wash cycle such as filling, soaking, washing, spinning and rinsing. If your washer is no longer pr ...ogressing properly through each cycle, replacing this part may alleviate the issue. You'll have to remove the control panel to access the old timer, and disconnect it from its two wiring harnesses and plastic locking tab. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Timer• Tools Needed: Multi screwdriver, needle-nose pliers Read More Read Less

The SxS Refrigerator Crisper Drawer is a transparent plastic bin designed to keep fruits and vegetables at their best for as long as possible. This a replacement drawer featur ...es a convenient pull handle. This part requires no tools or assembly to install.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Crisper Drawer• No tools required for installation Read More Read Less

This Range Element Receptacle and Wire Kit connects the surface elements of your range to the wiring harness. This kit includes (2) brackets (you'll only use one that matches ...your receptacle),(2) wires, (2) wire nuts, (2) pieces of heat-shrink wrap, and the receptacle. If your element is not heating, the connections may have shorted out. To access the part, remove the element that isn't working properly from your range, and the drip pan. Lift the top of the range and unscrew the old receptacle block. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Wire Splicing Tool, 8-1/4". This stripper specializes in stripping and cutting wire. This tool is designed with a lean nose for pulling and looping wire and equipped with precision ground cutters.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Element Receptacle and Wire Kit• Tools Needed: Multi screwdriver, wire strippers, heat gun Read More Read Less