DG8-501 Avanti Defrost Sensor
Part #: AVP DG8-501
Avanti Refrigerator Wine Cooler DEFROST SENSOR DG8-501
Avanti Refrigerator Wine Cooler DEFROST SENSOR DG8-501
Write Your Own Review
How to Replace the Avanti Products DG8-501 Avanti Defrost Sensor
Having an efficient and effective refrigerator is essential in any household. If your Avanti Products refrigerator starts to malfunction, the culprit may be a faulty defrost sensor. The Avanti Products DG8-501 Avanti Defrost Sensor helps ensure the correct temperature for optimal performance. To maintain the quality and efficiency of your refrigerator, it is best to replace this component as soon as possible. Here is an easy DIY guide to replacing the DG8-501 Avanti defrost sensor.
What You Will Need:
- New Avanti Products DG8-501 Avanti Defrost Sensor
- Screwdriver
- Pliers
- Replacing the Avanti Products DG8-501 Avanti Defrost Sensor:
1. Unplug the refrigerator from the power source.
2. Open the back of the refrigerator.
3. Locate and remove the screws holding the Avanti Products DG8-501 Avanti Defrost Sensor in place.
4. Once the screws have been removed, use the pliers to carefully detach the sensor from the refrigerator’s wiring.
5. Insert the new Avanti Products DG8-501 Avanti Defrost Sensor into the appropriate terminal.
6. Secure the sensor in place with the screws that were previously removed.
7. Close the back door of the refrigerator and plug the power source back in.
Your Avanti Products refrigerator will now be equipped with a new, functioning Avanti Products DG8-501 Avanti Defrost Sensor. You can rest assured that your refrigerator will provide optimal performance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Having an efficient and effective refrigerator is essential in any household. If your Avanti Products refrigerator starts to malfunction, the culprit may be a faulty defrost sensor. The Avanti Products DG8-501 Avanti Defrost Sensor helps ensure the correct temperature for optimal performance. To maintain the quality and efficiency of your refrigerator, it is best to replace this component as soon as possible. Here is an easy DIY guide to replacing the DG8-501 Avanti defrost sensor.
What You Will Need:
- New Avanti Products DG8-501 Avanti Defrost Sensor
- Screwdriver
- Pliers
- Replacing the Avanti Products DG8-501 Avanti Defrost Sensor:
1. Unplug the refrigerator from the power source.
2. Open the back of the refrigerator.
3. Locate and remove the screws holding the Avanti Products DG8-501 Avanti Defrost Sensor in place.
4. Once the screws have been removed, use the pliers to carefully detach the sensor from the refrigerator’s wiring.
5. Insert the new Avanti Products DG8-501 Avanti Defrost Sensor into the appropriate terminal.
6. Secure the sensor in place with the screws that were previously removed.
7. Close the back door of the refrigerator and plug the power source back in.
Your Avanti Products refrigerator will now be equipped with a new, functioning Avanti Products DG8-501 Avanti Defrost Sensor. You can rest assured that your refrigerator will provide optimal performance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
