All Categories

The Dryer Drive Belt wraps around the motor and pulley and rotates the belt and the belt tumbles the drum. If the drum of your appliance isn't operating as expected, replacing ... this part may alleviate the issue. To access the part, first lift up the lint screen cover and remove the two screws. If you have the type of lint screen that has the cover built in, just pull it out and then remove the screws. Next, take a putty knife around the edge of the top of your dryer and find the release clips--press these in to release the top of the dryer so you can swing it open. The front panel also needs to be removed to replace the belt. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Drum Belt• Tools Needed: Phillips-Head screwdriver, 5/16" nut driver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Dryer Timer controls the electrical components of the appliance and duration of its drying cycles. If any of the contacts in your appliance’s timer have burned out, or ...if the motor inside the unit shorted out and the timer is no longer functioning, you can easily replace the assembly with this part. This timer does not include the control knob, but you can purchase it separately (Item-WPW10711289). Note that this issue is often misdiagnosed; refer to the Repair Help section on the Whirlpool Parts website for additional repair information. Installing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Timer• Tools Needed: Multi screwdriver Read More Read Less

Maintain your laundry appliances with the high-quality Bosch Laundry Motor, designed to deliver reliable performance for your washing machine. This essential component, compat ...ible with Bosch, Thermador, and Gaggenau brands, ensures seamless operation and efficiency for your laundry routine. Engineered with precision, this motor fits perfectly in your washer, helping to maintain optimal performance and extend the life of your appliance. Whether you are repairing an existing unit or undertaking a DIY project, this motor is the perfect choice for smooth and effective washing. Trust in Bosch's reputation for excellence and Maintain your home's functionality with this durable and efficient motor component. Care for your appliances by investing in quality parts today. Read More Read Less

The Speed Queen D504515 THERMOSTAT GRN is an essential component for your Speed Queen appliance. We're your #1 source for genuine OEM appliance parts. Contact us for further q ...uestions as well as any other appliance parts needs! Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Stand Mixer Speed Control Plate controls the speed of the stand mixer motor. The speed control plate is part of the speed control system. If the contacts aren't closing an ...d your mixer is running loud, or if the contacts have failed and your mixer is no longer turning on, replacing the control plate may alleviate these issues. To access the part, remove all attachments and the bowl of the mixer. Then remove the back cover of the mixer and the screws from the trim band. Remove the wires from the seal of the mixer in order to take the spring off of the speed control plate. Make sure you hook the spring with a needle nose pliers securely to remove. Disconnect the wires from the phase control board. You'll then be able to remove the upper two screws holding in the old speed control plate. Note: These upper two screws are where you adjust the speed of your mixer. Make sure you measure them from the back of their post to the back of the speed control plate at 3/8-in. Replacing this part will require basic hand tools, some disassembly of the stand mixer and novice repair experience. You must unplug the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Stand Mixer Speed Control Plate Assembly• Tools Needed: Multi screwdriver, needle-nose pliers Read More Read Less

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

Ensure optimal performance and safety for your air conditioning unit with this essential fuse, sensor, and thermostat component. Designed specifically for GE, Hotpoint, Haier, ... Monogram, and Café appliances, this replacement part enhances reliability and efficiency. The WP28X10013 is crafted to withstand varying temperatures and offer precise functionality, making it crucial for maintaining the proper operation of your air conditioner and heater. With a focus on durability and compatibility, it secures the longevity of your appliance and reduces the risk of breakdowns. Easy to install, this part enables you to swiftly restore your cooling or heating system, ensuring comfort in your home or office. Maintain your AC parts today and enjoy peace of mind in every season with this high-quality protector, designed to meet the demands of modern living. Read More Read Less

The Range Temperature Sensor measures the oven temperature. If your oven isn't holding the correct temperature, replacing the sensor may alleviate this issue. This sensor repl ...aces many long tipped oven sensors and includes instructions and additional plugs to replace the original. To access the part, take the access panel off the back of the range and set it aside. Disconnect the sensor's wiring harness at the back of the oven. Then open the oven door, remove the racks, and remove the screws at the back of the oven holding the sensor in. This kit includes (2) adapters if needed. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Temperature Sensor Kit• Tools Needed: Phillips-Head screwdriver Read More Read Less