DOLLY FELT PADDING+(DW3)

How to Replace the Bosch 23001470 DOOR-OUTER

Replacing the Bosch 23001470 DOOR-OUTER is a relatively straightforward process, but it should be handled with care. This guide will walk you through the steps you need to follow to complete the replacement.

Tools You Will Need

Before beginning the process, make sure you have the following tools:

-Phillips head screwdriver
-Socket wrench
-Pliers

Step 1: Remove the Door Handle

Begin by using the Phillips head screwdriver to remove the screws that secure the door handle in place. Once they are removed, carefully pull off the handle from the door.

Step 2: Remove the Door Panel

Next, use the socket wrench to remove the bolts that secure the panel in place. Once all of the bolts are out, carefully pull off the panel.

Step 3: Disconnect the Wiring Harness

Now you need to disconnect the wiring harness. Use the pliers to carefully loosen the connector and then pull it off.

Step 4: Remove the Old Door-Outer

At this point, you can finally remove the old Bosch 23001470 DOOR-OUTER. Use the socket wrench to loosen the nuts that secure it in place and then pull off the component.

Step 5: Install the New Door-Outer

Now that the old component has been removed, you can install the new one. Insert the component into the opening and then secure it in place with the nuts.

Step 6: Reconnect the Wiring Harness

Reconnect the wiring harness to the component and then use the pliers to ensure that the connector is tight.

Step 7: Reinstall the Door Panel

Next, reinstall the door panel. Place it over the opening and then secure it in place with the bolts.

Step 8: Reinstall the Door Handle

Finally, reinstall the door handle. Line up the holes and then secure it in place with the screws.

Congratulations, you have now successfully replaced the Bosch 23001470 DOOR-OUTER!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.