297309000 Frigidaire Refrigerator Fan Motor Evaporator 115V
This is a genuine OEM part that works for some models of Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, Crosley, Kenmore, and Tappan models.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This is a genuine OEM part that works for some models of Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, Crosley, Kenmore, and Tappan models.
Write Your Own Review
The following parts are replaced by this product
- 216914200
- 216934100
- 297250000
DIY Replacement Instructions for 297250000 Frigidaire Evaporator Fan Motor
1. Turn off and unplug the refrigerator to avoid electric shock.
2. Remove the back panel of the refrigerator, located behind the freezer:
a. locate two screws that secure the back panel in place
b. unscrew the screws and set them aside
c. carefully lift the panel up and away from the refrigerator
3. Locate the old fan motor which sits in the center of the evaporator:
a. disconnect the electrical harness from the motor
b. remove the mounting screws located on either side of the motor
c. gently pull out the motor and remove it completely
4. Install the new fan motor 297250000 by reversing step three:
a. place the new fan motor into the evaporator
b. replace the mounting screws
c. reconnect the electrical harness
5. Replace the back panel and the two screws to secure it back in place.
6. Plug the refrigerator back in and turn it back on.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Turn off and unplug the refrigerator to avoid electric shock.
2. Remove the back panel of the refrigerator, located behind the freezer:
a. locate two screws that secure the back panel in place
b. unscrew the screws and set them aside
c. carefully lift the panel up and away from the refrigerator
3. Locate the old fan motor which sits in the center of the evaporator:
a. disconnect the electrical harness from the motor
b. remove the mounting screws located on either side of the motor
c. gently pull out the motor and remove it completely
4. Install the new fan motor 297250000 by reversing step three:
a. place the new fan motor into the evaporator
b. replace the mounting screws
c. reconnect the electrical harness
5. Replace the back panel and the two screws to secure it back in place.
6. Plug the refrigerator back in and turn it back on.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
