00322985 Bosch Oven Ignition Head

Step 1: Safety First - Before attempting to replace the Bosch 00322985 Ignition Head, make sure to disconnect your power source and allow it to cool down for at least an hour. Additionally, wear protective gear such as gloves and safety glasses when working with electrical components.

Step 2: Open the Ignition Panel - Open the ignition panel located just above the spark plug and spark plug wire. Carefully remove the spark plug wire and set aside.

Step 3: Remove the Old Ignition Head - Using a wrench, carefully unscrew the bolts that hold the old ignition head in place. Gently pull the old ignition head out of the opening.

Step 4: Install the New Ignition Head - Place the new Bosch 00322985 Ignition Head into the opening, making sure that the spark plug wire is properly aligned. Secure the ignition head with the same bolts you removed in Step 2.

Step 5: Reconnect the Spark Plug Wire - Reattach the spark plug wire to the new ignition head and ensure that it is securely fastened.

Step 6: Test the New Ignition Head - Turn the power back on and test the new ignition head by turning the start switch. If the spark is consistent and strong, your new Bosch 00322985 Ignition Head has been successfully installed.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.