285620 Whirlpool Washer
Part #: WPL 285620
The Whirlpool 285620 WASHER . We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0559 lbs
Dimension : 3.3858 x 3.0708 x 0.748
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Whirlpool 285620 WASHER . We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0559 lbs
Dimension : 3.3858 x 3.0708 x 0.748
Write Your Own Review
The following parts are replaced by this product
- 3351014
Replacing the Whirlpool 285620 WASHER Belt: A Step-by-Step DIY Guide
Are you ready to tackle a DIY repair job on your washing machine? Replacing the belt on your Whirlpool 285620 WASHER can be an easy fix that you can do yourself. Here's a step-by-step guide to make the process straightforward.
1. Unplug the WASHER from the power outlet and shut off any water lines.
2. Carefully tilt the washer back until you can gain access to the bottom of the machine.
3. Remove the bottom cover of the WASHER, which is typically held in place with several screws.
4. Locate the belt and disconnect it from the motor pulley by pulling it out.
5. Lift the motor out and remove the old belt.
6. Place the new belt around the motor pulley and lower the motor back into place.
7. Connect the belt on the other end by looping it over the drum pulley.
8. Be sure that the belt is snugly in place and has no signs of wear or damage.
9. Reattach the bottom cover and tighten all screws securely.
10. Plug in the WASHER and turn on any water lines.
You just successfully replaced the belt on your Whirlpool 285620 WASHER! Now you can use your washing machine with confidence knowing that you saved some money and completed the repair yourself.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you ready to tackle a DIY repair job on your washing machine? Replacing the belt on your Whirlpool 285620 WASHER can be an easy fix that you can do yourself. Here's a step-by-step guide to make the process straightforward.
1. Unplug the WASHER from the power outlet and shut off any water lines.
2. Carefully tilt the washer back until you can gain access to the bottom of the machine.
3. Remove the bottom cover of the WASHER, which is typically held in place with several screws.
4. Locate the belt and disconnect it from the motor pulley by pulling it out.
5. Lift the motor out and remove the old belt.
6. Place the new belt around the motor pulley and lower the motor back into place.
7. Connect the belt on the other end by looping it over the drum pulley.
8. Be sure that the belt is snugly in place and has no signs of wear or damage.
9. Reattach the bottom cover and tighten all screws securely.
10. Plug in the WASHER and turn on any water lines.
You just successfully replaced the belt on your Whirlpool 285620 WASHER! Now you can use your washing machine with confidence knowing that you saved some money and completed the repair yourself.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.